We often hear a lot about stalled restorations, or the stressful race in getting the car ready for the Spring Thaw, so here are some tips to help you get it done on time…

Partner with your parts guy.
In this day and age most of us buy our parts online, but it’s high time we all went back to a local parts source. Through the Spring Thaw I met a VW parts supplier, and he’s really become a partner on this project. He’s seen far more restorations then I have, and often suggests parts or order of assembly that I hadn’t thought of.  And while his business is selling parts, with me he allows returns and works hard to be competitive at price. It’s refreshing to be able to pickup the phone and say “it’s rear brakes time, can you order in the stuff” and not have to click through 18 pages, only to find out when the parts arrive I totally forgot I would need flex lines. How do you find a good parts guy? First, ask around…and then commit. Make a series of orders with him, and show you’re a ‘return’ customer. If he starts to ask about how your project is going, and shows genuine interest…you’ve found one.

Post a build thread.
Stop wasting hours surfing other peoples threads and questions, and instead start a build thread. Every time you get frustrated or burn out, it’s great to go back and witness all the things you’ve succeeded at. Keeping the story going, also helps to keep you going on your project. And the best part? Build threads with regular post counts attract those experts who surf forums regularly. Stuck on a problem, a simple post about it will result in answers being directed right at your project. Lastly, the encouragement from other enthusiasts on your posts is a huge boost after a tonne of work.

Implement “The Harrison rule”
Years ago I was burnt out on a rally car project which had sat for a long time. My buddy Harrison finally snapped me into it, by implementing what became known as “The Harrison Rule”. The rule is simple: Spend a minimum of one hour each day in the garage. You are allowed to work more hours in a day, but you can’t “bank” or miss any hours. Thus, two hours tonight doesn’t mean I can skip tomorrow. During your one hour a day, you don’t even have to touch your project! You might clean the work bench, sweep the floor, I’ve even just sat looking at the car for an hour. After a few nights, however, you get bored and touch the project. You might just turn a few bolts. Soon you find yourself excited to get back in the garage because you can once again seeprogress on the project. Eliminate the TV. the internet surfing, the sitting back on the couch, and suddenly an hour a day becomes available. The Harrison Rule has saved me from more projects then I could count.

Hopefully these ideas keep you from having the perpetual “project” sitting in your garage!

-Dave

Sitting in the CCA garage right now is a bare Volkswagen Beetle pan. So far in the first two months I’ve managed to strip the car down, repair the body, and prep the pan. The last month has been quite a bit slower though, as I’ve accomplished nothing more then mounting the transmission, shift rod and shifter. True, I did manage to squeeze a Porsche 5 speed into the Volkswagen floorpan, but the entire job was nothing but frustration. Two transmission rebuilds, plenty of cutting and welding and then finally 39 hours to setup the shift linkage so I could get all five gears and reverse while using the stock Beetle shifter.

While I have a mountain of things to do ahead of me, the experience has taught me just how insane some of you are each year. There are a few things I just don’t understand about this restoration thing  though. Like….

Where did all the parts go?! 
When I tore the car down, I put every nut, bolt and part into a ziplock bag, labelled it and placed the bag into one of three plastic bins. Now, as I go to rebuild the car, I can never find the bag I need. And why does the “front suspension” bag contain both the left and right side bolts, but the “rear suspension” bag only has 1-side? To make matters even worse, I tore down two other parts cars, labelling the parts as well. Why is it when I can’t find “rear suspension bolts” for my car, none of the parts car bins have them either!?!

Where does all the money go?
Back when I had a running, driving, car, the finances were simple. I needed something, I bought it. If I needed something big, I saved and I bought it. Most importantly, though, once I bought something there was a appreciable difference. Silent bearings, good brakes, new cosmetics. Now I just have boxes of parts, a floorpan…and no money. I’m working, I’m getting paid every two weeks but the car remains just a floorpan and there is no money. I knew restorations were bad, but this is black-hole suction!

Why doesn’t this fit!?!
Seriously, did an evil elf sneak in here with a hammer? Parts that came off the car were cleaned up, restored and painted…you’d think they’d fit. None of that seems to fit without grinding, drilling, modifying or dancing an ancient ritual found on the internet. I suppose, in hindsight, I should have just built a stock restoration…maybe then things would go together?

(this one is for Warwick) When will the mess stop?!
I think its about once a week that I announce I’m finally done with the grinding, cutting, drilling, welding and spilling. “Don’t worry Warwick,” I tell him, “it’s all clean bolt-together stuff now.” Um, I started in September…it’s the end of November. I mean, it has to stop before the car is driving, right?

-Dave

P.S. Stop in tomorrow to see my four tips for making it through a major restoration…

When Malcolm Barber, CEO of Bonhams, first caught sight of what was to be his 1903 Peerless Model F (16HP, Twin Cylinder, Rear Entrance Tonneau) just over twenty years ago, he thought he had found something unusual. He found the car in a Hawaiian collection, and discovered it had previously been part of the Denver Colorado Transport Museum collection, but as to who had originally owned the car and the story of its past remained a mystery.

Nearly twenty years later Malcolm received a call out of the blue from the Silver Times newspaper in Lake City, Colorado in collaboration with the Horseless Carriage Club of America who told him that his 1903 Peerless had been the Hinsdale County’s first motorcar and invited him to attend a summer tour organised by the Club. The aim being to reunite the Peerless with the family who bought it originally.

The car was shipped from London to New Jersey by container, couriered from New Jersey to Denver and then driven by Malcolm from Gunnison (west of Denver) to Lake City, a mining town 9,000ft high in the Rockies. So, 108 years after its first drive, the car still made it up the steep, precarious roads to the town. Waiting for the car to arrive was the 102yr old granddaughter of the original owner, the mining engineer at the Lucky Strike mine, who had not seen the car since 1952, when the family sold it. She said she always remembered the car and was astonished to see it again.

As the Peerless was a local celebrity at the time, numerous postcards taken in 1903 were sold in the local shop. Thomas Beam bought the Peerless for a pricey $2,300. They were considered one the three ‘P’s of American manufacturing: the Peerless, Packard and Pierce Arrow, the US’s best early motorcar manufacturers.

Still going strong, the Peerless, now back in the UK, will be making its 20th run from London to Brighton on November 7th. Malcolm comments: “When you have had a lifelong love affairs with cars, to own one of the great originals like this is an enormous privilege. You realise you are driving automotive history and that the car is never going to be yours, you are merely its keeper for a time. Taking it back to the scenes in which it first saw the road in the breathtaking settings of Colorado, that has to be one of the highlights of my life.”

By Nigel Matthews

When Porsche introduced the Cayenne SUV in 2002, a number of Porsche purists and even automotive journalists felt that the company was making a big mistake entering the luxury high-street SUV market.

If they had done their homework, they would have known that this was not Porsche’s first four-wheeler capable of tackling muddy fields. Dr. Ferdinand Porsche built three prototype-tractors in 1934.

The success of these well-built and typically Porsche “over-engineered” machines led to the production of a range of tractors fitted with one- to-four-cylinder engines.

The one-cylinder model was called the Junior, the two-cylinder the Standard, the three-cylinder the Super and the four-cylinder the Master.

There was a model suited to every farmer’s needs. Porsche partnered with the tractor manufacturer Allgaier Brothers; they built 35,000 Porsche tractors until Mannesmann (now owned by Vodafone in a $185 billion US takeover in 2000) took control of building the Porsche tractor in 1956. Mannesmann continued production until 1963 at which time a total of 125,000 units had been built.

A Porsche "Coffee Train" tractor's smooth lines were not for aerodynamics, but to prevent damage to the coffee plants. Photo: PorscheTractors.com

Approximately 1,000 made their way to North America. One beautifully restored, 1959 one-cylinder, 82-cc. Junior, producing 14 h.p, was offered for sale at RM Auctions annual Monterey event. The estimated sale price was $16,000 to $20,000 US. The hammer fell at $28,600 and included the 10-per-cent buyer’s premium.

The new owner has a magnificent example in a condition better than the day it came off the production line. The air-cooled diesel engines were cooled by a fan-duct system that was driven by the crankshaft-driven generator.

If you have ever worked on a type one Beetle or a Porsche 356, this will sound very familiar.

Comedian Jerry Seinfeld is a huge Porsche collector and attended the 59th annual Pebble Beach Concours, bringing two Porsche racing cars; he achieved a second-in-class win with his 1970 Porsche 908/03 race car. The (slightly slower) one-cylinder Porsche model 108 Junior would make a nice addition to his or any other serious Porsche collection.

Leave it to the French to create the most wacky and entertaining car chase scenes! Like the Dukes of Hazzard, but without the tough American iron to absorb the landings, the stuntmen and European tin in this 1975 film take a beating. The leading man in his Fiat 131 tries to get away from the baddies in their VW K70, leaving a trail of wreckage in their wake.

It is surprisingly hard to find much information about this film online, but famous stunt driver Remy Julienne is credited as a driver. He later went on to do stunt work in many of the James Bond films. It turns out a Citroen DS makes a great ramp, french roads are full of talented stunt drivers, and a Fiat tends to fly better than a VW. This just makes us want to go buy an old Peugeot and make drift!

[via Retro and Classic Cars]

Racing was an entirely different world back in the 60′s. This 8mm film, complete with its clacketing projector reel soundtrack, really has a neat feel to it. Just a bunch of people hanging out by the bay in NorCal, watching a stream of SCCA Production A/B/C warriors battle and bump it out on the streets of Candlestick Park in 1965. The 1.9 mile temporary road course was used from 1963 until 1965, using the parking lots and roads surrounding the relatively new San Francisco Giants stadium. Frantic flagmen, haybales for safety (kinda), and lots of excitement! Keep your eye out for the #7 Cobra driven by legendary Phil Hill, and the chequered flag taken by Don Wester in his yellow Porsche 904(?).  [Video link via The Chicane]

The track layout as it was in the 1960′s.

By Nigel Matthews

The Russian car Gorkovsky Avtomobilny Zavod — translated from Russian, “Gorky Automobile Plant,” or simply known as a GAZ — was a product of a joint venture between Ford and the Soviet Union which became the largest auto plant in Europe.

The first model off the line was based on Ford’s new Model A, and was called the GAZ-A. The Canadian equivalent likely would have been the GAZ-EH.

The first GAZ I encountered was in 2006 at a Barrett-Jackson auction. It was a 1974 Gaz-13 “Chaika” Limousine used by a Kremlin official. That car surprisingly sold for $43,200 at this all-American show.

I was pleasantly surprised to see a photo of a smaller version cross my desk and wondered how this car, which looked almost brand-new, ended up in Canada. What was the story?

The only way to find out was to call the owner, Mikhail Molchanov. He told me he had owned the 1959 GAZ-Volga in Russia for many years. He left it behind when he immigrated to Canada but planned to have it shipped at a later date.

He purchased two other Volgas to provide a sufficient supply of parts so the car could be restored in Russia, which took three years. When completed, it was shipped to B.C.

This second-generation model has a different grille, with horizontal bars and a large star in the centre. The story goes that one of the Russian generals disapproved of the first-generation grille.

So the designer thought that, if he placed a big star in the centre, the general could hardly disapprove of that and they got away with it. The third-generation cars had the leaping deer removed from the hood, because it was not very pedestrian-friendly. Not many cars are.

If you see this magnificent car — which looks like a cross between a Studebaker and a Ford — on the streets or at a car show somewhere in British Columbia, take a good look at it, because I doubt you will ever see another one in Canada.

Nigel Matthews is the sales and marketing executive for Hagerty Canada

By Nigel Matthews with Philip Powell

For the first time in the Pebble Beach Concours d’Elegance’s 60-year history a white car won the best of show award in 2010.

A 1933 Delage took the honour at the prestigious Carmel, California, event and to be perfectly honest, I did not think the white colour scheme was going to pull it off. However, the car looked stunning and simply glistened all day on the 18th Fairway with a non-stop crowd milling around it.

A car that was born in the depression and restored in the recent recession, the Delage D8S certainly gives a new meaning to the phrase elegance.

In January of this year, at the request of Jim Patterson of Louisville, Kentucky (not to be confused with Jim Pattison of B.C.) I flew to Blenheim, Ontario to the RM Restoration workshops to view and document his one-off 1933 Delage D8S de Villars Roadster.

Patterson had purchased the car at the RM auction in Monterey during August of 2007 for $3.74 million dollars. The car was very nice and had undergone a recent restoration but it was not up to the exacting standards of the Patterson collection, which consists of numerous curvaceous French automobiles, filled with outstanding examples from Bugatti and Delahaye, as well as Delage.

Intrigued by the restoration process, Patterson thoroughly researches each vehicle’s history, and then ensures that the restoration is correct in every detail. In this instance, the vehicle’s provenance is both distinguished and brief, beginning with first owner Aurelio Lerroux, the son of Alejandro Lerroux, then Prime Minister of Spain. The second owner was a Sr. Rico, friend of Aurelio Lerroux and the brother of the mayor of Madrid.

The car then passed to the Gran Hotel Velasquez in Madrid where, oddly, it served as VIP transportation for several years. Later, it was put into storage, hidden from curious eyes for some 40 years, having had just three owners. For sheer glamour, few could have matched the 1933 Delage D8S Roadster, which was the star of the 1934 Paris Auto Salon, it then went to the Delage showroom on the Champs d’Elysees where it was advertised for over 100,000 francs, an exorbitant price in those years.

That the car was a prototype is confirmed by the Coachbuilder concept drawings, which are still with the car. Clearly, Carrosserie deVillars seized a one-time opportunity to showcase their daring concept on the new D8S chassis -the most exclusive and powerful Delage had to offer. The result is a masterpiece, the finest work presented by two of the most innovative French companies of that era. Fortunately, the car’s designers were given an outstanding platform on which to apply their artistry.

The D8S was a marked improvement of Louis Delage’s D8 masterpiece, with a lightened and lowered chassis, a shorter 130″ wheelbase, and an upgrade of the D8′s in-line, 4-litre pushrod overhead valve straight eight to 145 bhp @ 4500 rpm, enough to make it quicker than a blown Bentley of the period.

During the early stages of development, the engineering team was also designing a new military aircraft engine. Deciding to link the two, Delage asked his staff to produce a cylinder head with specially made short springs located next to the valves to help prevent breakage. Even the D8S carburetor was an aviation type, surrounded by heated oil to avoid icing. Interestingly the coil and distributor are from Delco-Remy rather than French supplier Marchal. The brakes are cable-operated although, unusually for the period, they’re vacuum assisted. All of these unique engineering features remain as originally installed and have now been restored to as new condition by the skilled RM craftsmen.

One of the design objectives was to make the hood as long as possible, allowing nothing to interfere visually with the unbroken sweep from radiator to windshield. Typical cowl vents would have marred the effect and so vents were slotted in under the hood, opening into the cowl area to supply fresh air to the cockpit.

A foolproof system assured that the vents aligned with the hood opening mechanism to prevent damage. As a further example of attention to detail, the jack is mounted securely to the steering box. A handy wrench is attached to the fuel pump. Even the headlamps are a work of art, with diffuser lines worked into the silver-plated bowls.

However, it seems likely that they succeeded in designing a car equally impressive with the top up as well as down. Inevitably not everything is what it seems in a restoration of this kind. For example, when Don McLelland, the Project Manager first examined a photo from the Paris show it became apparent that the body chrome mouldings were originally concave in shape. Yet the current mouldings were convex. As the crew disassembled the car, they noted that the structural wood below the surface of the steel skin actually had cut-outs and grooves placed by the coach-builder to fit concave mouldings. RM removed several fill-in wood pieces and repaired the steel door skins to allow sufficient room, then accurately reworked the mouldings.

Patterson’s Delage D8S has now been returned to its original white colour scheme though the finish is extraordinary, even for a renowned classic.

Writing this story and having it published in my name prior to the Pebble Beach Concours d’Elegance presented a problem. I judge at the event and had to distance myself from any conflict of interest, despite not judging that particular class or having a best of show vote, it was simply the right thing to do. Philip Powell and I worked on this project and article and I’m happy to bring this to you today.

Philip Powell is the host of Marque1.com and Nigel Matthews is the sales and marketing executive for Hagerty Canada

Words & Photos by Nigel Matthews

The Steamworks Concours d’Elegance, which stretched from Gassy Jack Square to the west end of Water Street in Vancouver on Sept 4th, was protected by a tank! It was all part of a very well planned display of vintage military vehicles supplied by the Canadian Military Education Centre in Chilliwack.

As you might imagine, the organizers had to answer some serious questions from City Hall before the 36,000 kg (39.7 ton) tank was permitted to place one link of its rubber tracks onto the city street.

The T-55s lineage dates back to the T-34 and World War Two. More T-55s have been produced than any other tank; production figures vary ranging from 42,000 to as many as 57,000 used by 50 countries on both sides of the Iron Curtain. It is estimated that 39,000 are still used in military service today.

If mechanical specs interest you here are a few. Torsion bar suspension, five rubber-tire road wheels are mounted per side. Unlike other tracked vehicles there are no return wheels for the tracks; the track runs across the top of the road wheels on its return.

The V-12 diesel engine is mounted transversely and drives the rear sprockets, just like the Lamborghini Muira! The dimensions are as follows, length 6.4 m (21ft), width 3.3 m (10.8 ft) and height 2.4 m (7.8 ft)

The modified VW Bus with a Cadillac V-8 engine on display half a block from the tank (pictured above), produces 20 horsepower more than the T55s 580-hp. The tank’s top speed is 50 km/pH (30 mph) with a range of 600 km (372 miles). The amour plating is 203 mm thick so door dents are not a problem, but the very small shopping mall spaces of today would be.

As I made my way down Water Street, I met two police officers patrolling their beat and asked them which vehicle on the street they would like to take home? They both replied in unison “the tank”.

Where does one find a second-hand tank? Try tanksforsale.co.uk! You might find a ‘one owner, driven only on Sundays by a little old lady’ example for sale.

Nigel Matthews is the sales and marketing executive for Hagerty Canada